Always stay in touch with your home!
Soon you will not be able to imagine your life without smart home system! Can you imagine life without smartphones and tablets? Probably not.
A few years ago it was considered luxurious and inaccessible.
Today, almost everyone has it. Similarly, intelligent home management ceases to be a privilege for the few, and becomes an indispensable tool to ease our daily routine.
Meet Cockpit, a smart and simple system that enables you to control your home from anywhere in the world, using one intuitive application on your smartphone.
Smart home has never been so accessible!
Our goal was to offer an affordable smart home solution, that everyone could easily install and use in their homes. By developing a whole range of wireless smart home devices, that enable you to control your electronic devices with your smartphone, we managed to bring the advantages of this prospective technology in many homes around the world.
It’s morning. The blinds open and your bedroom fills with soft light and warmth while your coffee is being made.
Feels like waking up in a fairytale?
Well…. you’re still at your home – but from now on, it’s Cockpit in charge, making sure you start your day the right way.
Your home is the most valuable place in the world, right?
No wonder you want it to be safe and protected at all times.
Whether you’re in or out, Cockpit system is always there to monitor events and notify you if something is wrong.
Imagine a winter evening. You come home and from the door you feel pleasant temperature. You do not like winter? OKAY. It’s summer. Hot day. You come home and the living room is a pleasant 18 degrees … Thanks to Cockpit! Not only it regulates the temperature in an intelligent way. First and foremost is that you reduce the consumption of energy and… save!
Managing all of your home devices from one place.
Flexibility for new devices and appliances.
Maximizing home security.
Remote control of home functions.
Increased energy efficiency.
Home management insights.
Copyright ©KATRORI 2019.
COCKPIT main Gateway is used to configure wireless network, control switches, dimmers, motion sensors, temperature sensors, and other modules/devices (elements of home automation) & Support creation of scenes, schedules, events and notifications. Through any iOS or Android device (PC, tablet, Smartphone) allows: home automation control and supervision , video monitoring (IP cameras) & energy metering.
Power supply: 110V – 230VAC +/-10%, 50/60Hz, 24-30VDC
Rated load current of AC output (resistive load): 1x10A / 230VAC
Rated load current of DC output (resistive load): 1x10A / 30VDC
Output circuit power of AC output (resistive load): 2300W
(230VAC)
Output circuit power of DC output (resistive load): 240W(24VDC)
Digital temperature sensor range (sensor must be ordered
separately): -50 ~ 125°C
Operation temperature: -10 ~ 40°C
Monitoring:
– Electrical power load in W
– Electric energy consumption in kWh
Power monitoring accuracy: P=5~50W, ±3W P>50W, ± 3%
Distance: up to 30m
Dimensions (WxHxD): 41,8mm x 36,8mm x 15,4mm
Package dimensions (WxHxD): 79mm x 52mm x 22mm
Weight: 28g
Brutto weight (package): 34g
Electricity consumption: 0,4W
For installation in boxes: Ø ≥ 60mm or 2M
Switching: Relay
On/Off module switches On or Off the electrical device (e.g. light, fan, etc ...). It can be controlled either through a wireless network or through the wall switch. The module is designed to be mounted inside a “flush mounting box” and is hidden behind a traditional wall switch. Module measures power consumption of electrical device and supports connection of digital temperature sensor.
Power supply: 110 – 230VAC ±10% 50/60Hz, 24- 30VDC
Rated load current of AC output (resistive load): 2x4A / 230VAC
Rated load current of DC output (resistive load): 2x4A / 30VDC
Output circuit power of AC output (resistive load): 2x920W
(230VAC)
Output circuit power of DC output (resistive load): 2x96W
(24VDC)
Digital temperature sensor range (sensor must
be ordered separately): -50 ~ 125°C
Operation temperature: -10 ~ 40°C
Monitoring:
– Electrical power load in W
– Electric energy consumption in kWh
Power monitoring accuracy:
P=0~200W, ±2 W P>200W, ± 3%
Distance: up to 30m
Dimensions (WxHxD): 41,8mm x 36,8mm x 16,9mm
Package dimensions: 79mm x 52mm x 22mm
Weight: 28g
Brutto weight (package): 34g
Electricity consumption: 0,4W
For installation in boxes: Ø ≥ 60mm or 2M
Switching: Relay (2x)
Double On/Off switches On or Off two electrical devices (e.g. lights, fans, etc ...). It can be controlled either through a wireless network or through the wall switches. The module is designed to be mounted inside a “flush mounting box” and is hidden behind a traditional wall switch. It measures power consumption of two electrical devices and supports connection of digital temperature sensor.
Power supply: 110 – 230VAC ±10% 50/60Hz, 24- 30VDC
Rated load current of AC output (resistive load): 2x4A / 230VAC
Rated load current of DC output (resistive load): 2x4A / 30VDC
Output circuit power of AC output (resistive load): 2x920W
(230VAC)
Output circuit power of DC output (resistive load): 2x96W
(24VDC)
Digital temperature sensor range (sensor must
be ordered separately): -50 ~ 125°C
Operation temperature: -10 ~ 40°C
Monitoring:
– Electrical power load in W
– Electric energy consumption in kWh
Power monitoring accuracy:
P=0~200W, ±2 W P>200W, ± 3%
Distance: up to 30m
Dimensions (WxHxD): 41,8mm x 36,8mm x 16,9mm
Package dimensions: 79mm x 52mm x 22mm
Weight: 28g
Brutto weight (package): 34g
Electricity consumption: 0,4W
For installation in boxes: Ø ≥ 60mm or 2M
Switching: Relay (2x)
On/Off D module switches On or Off the electrical device (e.g. light, fan, etc...). Output contact is voltage free (dry contact), so also loads with different power supply can be connected to the module. The module can be controlled either through a wireless network or through the wall switch. The module is designed to be mounted inside a “flush mounting box” and is hidden behind a traditional wall switch. Module supports connection of digital temperature sensor.
Power supply: 110V – 230VAC +/-10%, 50/60Hz, 24-30VDC
Rated load current of AC output (resistive load): 1x10A / 230VAC
Rated load current of DC output (resistive load): 1x10A / 30VDC
Output circuit power of AC output (resistive load): 2300W
(230VAC)
Output circuit power of DC output (resistive load): 240W
(24VDC)
Digital temperature sensor range (sensor must be ordered
separately): -50 ~ 125°C
Operation temperature: -10 ~ 40°C
Distance: up to 30m
Dimensions (WxHxD): 41,8mm x 36,8mm x 15,4mm
Package dimensions: 79mm x 52mm x 22mm
Weight: 28g
Brutto weight (package): 34g
Electricity consumption: 0,4W
For installation in boxes: Ø ≥ 60mm or 2M
Switching: Relay
On/Off thermostat is ideal for directly controlling electric or water-based underfloor heating systems, electric water heaters, hot water pumps, electric radiators and similar. You can control it either remotely through the Z-Wave network or through wall switches. It also measures power consumption and supports the connection of a digital temperature sensor.
Power supply: 110V – 230VAC +/-10%, 50/60Hz, 24-30VDC
Rated load current of AC output (resistive load): 1X 10 A /230VAC
Rated load current of DC output (resistive load): 1X 10 A /30VDC
Output circuit power of AC output (resistive load):
2300W (230VAC)
Output circuit power of DC output (resistive load): 240W(24VDC)
Power measurement accuracy: P=5–50W, +/- 3 W, P>50W, +/-3%
Digital temperature sensor range: -50° ~ +125°C, resolution 0.1°C
Digital temperature sensor cable length: 1000 mm
Operation temperature: -10° ~ +40°C
Distance: up to 30 m indoors (depending on building materials)
Dimensions (WxHxD): 41.8 x 36.8 x 15.4 mm
Packaging Dimensions: 115 x 96 x 22 mm
Weight (including packaging): 48 g (64 g)
Electricity consumption: 0.4 W
For installation in boxes: Ø ≥ 60 mm or 2 M
Switching: Relay
Dimmer is the first MOSFET-switching lights device that also supports control of low-voltage halogen lamps with electronic transformer, dimmable compact fluorescent lights and dimmable LED bulbs. It also measures the power consumption of electrical devices and supports the connection of a digital temperature sensor. Dimmer dims the light. It can be controlled either through a wireless network or through the wall switch. It is designed to be mounted inside a “flush mounting box” and is hidden behind a traditional wall switch.
Power supply: 110 – 230VAC ±10% 50/60Hz, 24-30VDC
Rated load current of AC output: 0,6A / 230VAC
Rated load current of DC output: 0,85A / 30VDC
Output circuit power of AC output (resistive load): 140W(230VAC)
Output circuit power of DC output (resistive load): 21W (24VDC)
Digital temperature sensor range (sensor must be ordered
separately): -50 ~ 125°C
Operation temperature: -10 ~ 40°C
Monitoring:
– Electrical power load in W
– Electric energy consumption in kWh
Power monitoring accuracy: ±2W
Distance: up to 30m
Dimensions (WxHxD): 41,8mm x 36,8mm x 15,4mm
Package dimensions: 79mm x 52mm x 22mm
Weight: 28g
Brutto weight (package): 34g
Electricity consumption: 0,7W
For installation in boxes: Ø ≥ 60mm or 2M
Switching: MOSFET
Dimmer 0-10V module is used for dimming lights, fan speed regulation and control of any other device with 0-10V input control. Module has a standard 0-10V output and a multi-function input, which may be a push button / switch, a potentiometer or 0-10V signal.
Power supply: 12-24VDC
Max. sinking control voltage: -20 / +20VDC
Max. sourcing control voltage: 0-11VDC
Max. sinking current: 2mA
Max. sourcing current: 10mA
Digital temperature sensor range (sensor must be ordered
separately): 50 ~ +125°C
Operation temperature: -10 ~ +40°C
Distance: up to 30 m indoors (depending on building materials)
Dimensions (WxHxD): 41,8mm x 36,8mm x 15,4mm
Package dimensions (WxHxD): 79mm x 52mm x 22mm
Weight (Brutto with package): 28g (34g)
Electricity consumption: 0,5W
RGBW Dimmer is designed to control your RGB/RGBW strips and LED strips or bulbs in order to create countless color options and includes 5 special scene effects (Ocean, Lightning, Rainbow, Snow and Sun). The wide range of colors lets you “paint” your home according to your mood. Highlight your favourite wall by illuminating a picture on it in tones that you choose yourself. The module can work in combination with the other Z-Wave devices in your house. You can control it either remotely through the Z-Wave network or through wall switches.
Power supply: 110 – 230VAC ±10% 50/60Hz, 24-30VDC
Rated load current of AC output: 0,85A/ 230VAC
Rated load current of DC output: 0,85A / 30VDC
Output circuit power of AC output (resistive load):
200W (230VAC)
Output circuit power of DC output (resistive load): 21W (24VDC)
Digital temperature sensor range (sensor must be ordered
separately): -50 ~ 125°C
Operation temperature: -10 ~ 40°C
Distance: up to 30m indoors (depending on building materials)
Dimensions (WxHxD): 18x93x58mm
Package dimensions (WxHxD): 21x95x64mm
Weight: 50g
Brutto weight (package): 56g
Electricity consumption: 0,7W
For installation in boxes: DIN rail 35mm
Switching: MOSFET (Trailing edge)
Shutter controls the motor of blinds, rollers, shades, venetian blinds, windows, etc … It also supports venetian blind slats tilting. The module can be controlled either through a wireless network or through the wall switch. Precise positioning is supported for motors equipped with mechanical or electronic end switches. It is designed to be mounted inside a “flush mounting box” and is hidden behind a traditional wall switch. Module measures power consumption of motor and supports connection of digital temperature sensor.
Power supply: 110 – 230VAC ±10% 50/60Hz
Rated load current of AC output (resistive load): 2x4A / 230VAC
Output circuit power of AC output (resistive load):
2x920W (230VAC)
Digital temperature sensor range (sensor must be ordered
separately): -50 ~ 125°C
Operation temperature: -10 ~ 40°C
Monitoring:
– Electrical power load in W
– Electric energy consumption in kWh
Power monitoring accuracy: P=0-200W, +/-2W; P>200W, +/-3%;
Distance: up to 30m
Dimensions (WxHxD): 41,8mm x 36,8mm x 16,9mm
Package dimensions: 79mm x 52mm x 22mm
Weight: 28g
Brutto weight (package): 34g
Electricity consumption: 0,4W
For installation in boxes: Ø ≥ 60mm or 2M
Switching: Relay (2x)
Shutter DC controls the 12-24VDC motor of blinds, rollers, shades, venetian blinds, windows, etc… It also supports venetian blind slats tilting. The module can be controlled either through a wireless network or through the wall switch. Precise positioning is supported for motors equipped with mechanical or electronic end switches. The module is designed to be mounted inside a “flush mounting box” and is hidden behind a traditional wall switch. It measures power consumption of motor and supports connection of digital temperature sensor.
Power supply: 12-24VDC +/-10%
Rated load current of DC output (resistive load): 2A
Overcurrent protection: 6A
Output circuit power of DC output (resistive load): 48W
Digital temperature sensor range (sensor must be ordered
separately): -50 ~ 125°C
Operation temperature: -10 ~ 40°C
Monitoring:
– Electrical power load in W
– Electric energy consumption in kWh
Power monitoring accuracy: +/-5%
Distance: up to 30m
Dimensions (WxHxD): 41,8mm x 36,8mm x 15,4mm
Package dimensions: 79mm x 52mm x 22mm
Weight: 28g
Brutto weight (package): 34g
Electricity consumption: cca. 0,3W
For installation in boxes: Ø ≥ 60mm or 2M
Switching: H bridge
Radiator Thermostat controls radiator heating valves.
Power supply: 2×1.5V AA alkaline batteries, class III (SELV)
Low battery indication.
Operation temperature: 0 ~ 40˚C
Temperature setpoint range: 4 ~ 28˚C
Maximum water temperature: 90˚C
Distance: up to 30m.
Dimensions: L: 91mm Ø: 51 (RA)
Weight: 177g
Protection Class: IP 20
Package includes: module, AA alkaline batteries(x2), adapter
RS Room Sensor is a battery operated temperature sensor. When included into Z-Wave wireless network, its buttons can also be used to control the heating system.
Battery: Alkaline 2 x AA, 1.5 V
Battery lifetime: Up to 4-5 years
Backlight: Green LED
Ambient temperature: 0˚ to +40˚C
Battery monitoring: The sensor has a built-in monitoring circuit,
which will detect low or critical battery level.
Transmission frequency: 868.42 MHz
Transmission range in normal buildings: Up to 30 m
Transmission power: Max. 1 mW
IP class: 21
Dimensions: 81 mm x 66 mm x 21 mm
Electric/Water Heating Thermostat is a Z-Wave Plus enabled device for indoor temperature control. Water Heating Thermostat is mainly applied to control wall mounted boiler, water valve/pump etc., while Electric Heating Thermostat is for electrical heating system. The device is of high reliability and practicability, which can be included and operated in any Z-Wave network with other Z-Wave certified devices from any other manufacturers
Power Supply: AC85-260V, 50/60HZ
Output: ≤ 16A
Self Consumption: ≤1W
External Temp. Sensor (optional): NTC R25°C=15KΩ,
B25°C/50°C=3550K
Working Environment: 0-50°C 0-90% RH (Non-condensation)
Temperature Setting: 5-37°C 41-99°F (Adjustable)
Dimension: 86mm * 86mm *15mm
Hole Pitch: 60mm -61mm
A/C Control translates wireless commands to AC IR control code. It has a built in temperature sensor which allows Gateway to get the current room temperature.
Power supply: USB Power DC 5V 100mA or 3xAAA dry batteries
Low battery indication.
Operation temperature: 0 ~ 40˚C
RF operating distance: up to 25m
IR operating distance: up to 8m line of sight
IP learning: max. 23 commands
Dimensions: Ø =70mm, T = 18mm (Main unit)
Ø =70mm, T = 15.5mm (Battery chassis)
Weight: 60 g
Protection Class: IP 20
Package includes: module (battery and USB cable not included)
Multisensor 3in1 is a battery powered all-in-one motion sensor, temperature sensor, and lighting sensor. When the sensor detects motion in front of its viewing window, it will send wireless signal to the network. The sensor can report current temperature, and lighting levels in the immediate vicinity.
Power supply: CR123A lithium battery
Frequency Range: 868.42 MHz
Operation temperature: -10 ~ 40°C
Operation humidity: 85%RH max
Distance: App. 30m indoor
Dimensions (WxHxD): 28mm x 96mm x 23mm
Weight: 39g
Door/Window Sensor module detects the opening or closing of a window or door.
Power supply: 2xCR2450 3.0V 620mAh Lithium Battery
Low battery indication
Operation temperature: -10 ~ 40°C
Operation humidity: 85%RH max
The device is for indoor use only
Distance: up to 30m
Dimensions (WxHxD): 31mm x 70mm x 11.5mm
Weight: 23,6 g (without batteries)
Protection Class: IP 20
Package includes:
module, CR2450 batteries (2x), mounting kit
Smart Plug switches all kinds of loads. Local operation is possible by pressing the button on the module. Module measures power consumption. It has also integrated function Auto shut off (when overloaded) and After black out remember function.
Power supply: 230VAC, 50Hz
Maximum load: 13A resistive load
Operation temperature: 0 ~ 40°C
The device is for indoor use only
Distance: up to 30m (indoor)
Dimensions (WxHxD): 57.7mm x 94.5mm x 76.6mm
Weight: 118 g
Protection Class: IP 20
The Smart Plug 16A controls on/off function for the connected device. It also measures power consumption of the connected device according to the principle of fast sampling of voltage and current signals. A built-in microprocessor calculates energy and power from the measured signals. The Smart Plug 16A also acts as a Z-Wave repeater to improve the range and stability of the Z-Wave network.
Input voltage: 230V +/- 10% / 50Hz
Power load: Max.: 16A resistive (Duration: >
100.000 cycles with resistive load)
Overload protection: By STPM32 > 16A
Power consumption: < 1 W max
Housing dimensions: 43 x 52 x 75 mm
Housing colour: white
Weight (ex. packaging): ~ 80g
Operating temperature: 0 ÷ +40°C (32 ÷ 104°F);
<80% U.R. non-condensing
Storage operation: -20 ÷ +70°C (-4 ÷ 158°F);
<80% U.R. non-condensing
Plug & Socket type: Plug Type F, Socket
compatible with type C, E and F
960 HD 1.3 Megapixel, 4 screen support, motion detection alarm Surveillance Security Indoor Camera.
Lens: 4.2mm 1.3 Megapixel
Resolution: 1280*960, 640*352, 320*176
Night vision: 8 LRDs. SPK, Etc.
PTZ: Horizontal 355, Verticl 120
Shape: Cartoon Machine
Shape meterilas: Plastic (ABS)
Power supply: DC5V 2A
Voice intercom: support
Card record: support 64G (MAX) micro SD card
CMS record: support
Image: brighness, contrast are adjustable
Broadband: 2M-4M
Network: RJ45
Item size: 120*96*115mm
Package size: 200*150*120mm
Item weight: 280g
HD 1080P 2.0MP WiFi Camera CCTV Surveillance Security Outdoor Camera.
Micro SD size: Support up to 128G TF card (TF card not
included)
Recording type: TF card, support 24 hours continuous recording
WIFI Connection: Support
Antenna: 2.4GHz 3dBi antenna
Compression format: H.264
Onvif: Support
Lens: M12/4.8mm F1.2, 3X digital zoom
Pixel: 2 MegaPixel
Infrared lamp: 3 lattice lamps
IR-CUT filter:Auto switch
Recording type: TF card, support 24 hours continuous recording
Resulotion: (1280*1080), VGA(640*352),QVGA(320*176)
FLASH: 16M
Talk: Two way audio
Microphone: -52dB
Infrared distance: 15M
Power Supply: DC 12V 1A
AV Control is an IR transmitter based on Z-Wave technology. It is used for sending IR codes to infrared communication controlling devices such as TV, DVD and TV box. AV Control is also a security Z-Wave device and can use secure/ encrypted message to communicate in a Z-Wave networks. It supports the Over The Air (OTA) feature for the product's firmware upgrade.
Z-Wave Plus certified for wide compatibility (500 serials product)
Infrared max communication distance is about 12meters
Infrared emission angle is about 1800
Support firmware OTA
Power supply: USB Power DC 5V 1A
IR Coverage: IR Coverage: 360 degree, 7~10 m
Z-wave operation range: About 40m indoors (depending on
building materials)
Temperature Operation: 0 – 40°C
Storage: -10 – 50°C; 0-90% RH
Dimension: 85x85x26cm
Working current: About 60mA
Standby current: About 35uA
Smart Meter is used for energy measurements in single -phase electrical power network up to 65A. Meters measure energy directly in 2-wire networks according to the principle of fast sampling of voltage and current signals. A built-in microprocessor calculates energy, power and power factor from the measured signals. The module can be controlled through Z-wave network and it acts as repeater in order to improve range and stability of Z-wave network.
Main terminals (LI, NI, Lo, No)
Contacts capacity: 1.5 … 16 (25) mm2
Connection screws: M5
Max torque: 3.5 Nm (PZ2)
Optional terminals (1,2,4,5)
Contact capacity: 0.05 … 1 (2.5) mm
Screws: M3
Max torque: 0.6 Nm
Measuring input
Type (connection): single phase (1b)
Reference current (Iref): 5A
Maximum current (Imax): 65A
Minimum current (Imin): 0.25A Starting current: 20 mA
Voltage (Un): 230 V (±20 %)
Power consumption at Un: < 2W
Nominal frequency (fn): 50 and 60 Hz
Accuracy
Active energy and power
Standard EN 62053-21: class 1
Standard EN 50470-3: class B
Reactive energy
Standard EN 62053-23: Class 2
Optical communication
Type: IR – used to control
BICOM432-40-WM1
Input (1)
Rated voltage: 230 V (± 20%)
Input resistance: 450 kOhm
Safety
Indoor meter: yes
Degree of pollution: 2
Protection class: II
AC voltage test: 4 kV
Installation Category: 300 Vrms cat. III
Standard: EN 50470
Ambient conditions and EMC
Ambient conditions and Safety:
According standards for indoor active energy meters.
Temperature and climatic condition according to EN
62052-11
Dust/water protection: IP20
Operation temperature: -10 … 40°C
Storage temperature: -40 … 70°C
Enclosure material: self extinguish, complying UL94 V
Indoor meter: yes
Degree of pollution: 2
AC voltage test: 4 kV
Standard: EN 50470
Distance:up to 30 m indoors (depending on building
materials)
Weight: 150g
Brutto weight (packaging included): 170g
Installation: DIN rail 35mm
Dimensions (W x H x D): 36 x 90 x 64mm
Package dimensions (W x H x D): 40 x 95 x 80mm
Colour: RAL 7035
3-Phase Smart Meter is used for energy measurements in three-phase electrical power network and can be used in residential, industrial and utility applications. Meter measure energy directly in 4-wire networks according to the principle of fast sampling of voltage and current signals. A built-in microprocessor calculates energy, power and power factor from the measured signals. The module can be controlled through Z-wave network and it acts as repeater in order to improve range and stability of Z-wave network. It is designed to be mounted on DIN rail.
Main terminals: (L1I, L2I, L3I, NO, L1O, L2O, L3O, NO)
Contacts capacity: 2.5 … 16 (25) mm2
Connection screws: M5
Max torque: 3.5 Nm (PZ2)
Optional terminals: (DI, DO)
Contact capacity: 1 … 2.5 mm2
Screws: M3
Max torque: 1.2 Nm
Measuring input: Type (connection): three phase (4u)
Basic current (Ib): 5 A
Maximum current (Imax): 80 A
Minimum current (Imin): 0.25 A
Starting current: 20 mA
Reference voltage (Un): 3X230V/400V
Power consumption at Un: < 8 VA
Nominal frequency (fn): 50 and 60 Hz
Accuracy:
Active energy and power:
Standard EN 62053-21: class 1
Standard EN 50470-3: class B
Reactive energy:
Standard EN 62053-23: class 2
LED:
Colour: red
Pulse rate: 500 imp/kWh
Led on: no load indication
Optical communication:
Type: IR – used to control
BICOM432-40-IR
Input (16): Rated voltage: 230 V (± 20%)
Input resistance: 450 kOhm
LCD:
Display 7+1 digit (100Wh resolution)
Safety:
Indoor Meter: yes
Degree of pollution: 2
Protection class: II
AC voltage test: 4 kV
Installation Category: 300 Vrms cat. III
Standard: EN 50470
IKA232-20/230V is accessory of Smart Meter. It is used for switching On or Off the electrical load up to 32A. Communication with Smart Meter: over terminals A1 on IKA232-20 and 5 on 1ph Smart Meter or 15 on 3ph Smart Meter.
Voltage: 230V ± 10%, 50-60Hz
Current: 32A, 2 pole
Operation temperature: -15 … 55°C
Storage temperature: -40 … 80°C
Dust/water protection: IP20
Weight: 130g
Brutto weight (packaging included): 135g
Installation: DIN rail 35mm
Dimensions (W x H x D): 17,5 x 85 x 60mm
Package dimensions (W x H x D): 20 x 95 x 70mm
Coil consumption: 1.2W
Terminal with 5 x 20 mm fuse holder, type Adels-Contact 503 Si/1DS. 100 pcs Terminal 5 x 20 mm with fuse holder
Dimensions (WxHxD): 330mm x 220mm x 35mm
Gross weight: 585g
BICOM432-40-WM1 is accessory of Smart Meter. It is used for switching On or Off the electrical load up to 32A. Communication with Smart Meter: optical (IR) communication port.
Voltage: 230V ± 10%, 50-60Hz
Current: 32A, 4pole
Operation temperature: -25 … 55°C (>55 …70 at max. impulse
duration which is 1min)
Storage temperature: -30 … 80°C
Dust/water protection: IP20
Weight: 250g
Brutto weight (packaging included): 270g
Installation: DIN rail 35mm
Dimensions (W x H x D): 35,2 x 90 x 60mm
Package dimensions (W x H x D): 40 x 95 x 70mm
Coil consumption: 0.5W
The fuse must be installed in fuse holder: Adels contact 503 Si/ 1DS. 1000 pcs Micro fuse 5 x 20 mm
Dimensions (WxHxD): 110mm x 93mm x 72mm
Gross weight: 1120g
Digital Temperature Sensor has 1m cable with connector to connect directly to: Dimmer, Shutter, Shutter DC, On/Off, On/Off D, Double On/Off modules.
Digital temperature sensor range is from -50 ~ 125°C. The lenght
of the cable is 1000mm.
The sensor comes in three parts. The door mounted part is installed by two screws on the door. The second part, the door frame, is installed on the door frame, this part has 2 connectors for 2 wires. Third part is a cover for connectors. When the door is closed the door mounted part and the door frame should be aligned.
Temperature sensor can be installed behind this 2M casing SET. It is suitable for mounting on boxes Ø60 with claws. SET consists of: 1 x cover plate1, 2 x 1M perforated blank cover and 1 x mounting frame 2M with claws. 2M casing SET is made of PC/ABS material and comes in 2M dimmenssions. 2M casing set is available in polar white colour.
Temperature sensor can be installed inside this Wall mounted casing. The dimmenssions of the Wall mounted casing are 71mm x 71mm x 27mm. This casings are made from ABS material and are available in white colour.